欢迎光临www.boppfilmsales.com & www.apigcl.com
Heat-sealable cigarette pack film, for printing, lamination and flexible packaging, supply to cigarette and tobacco pack converters.
| Product code | APIG-BPP-018 |
|---|---|
| H.S. code | 3920209090 |
| Category | BOPP Film (Polypropylene film) |
A.) BOPP cigarette tobacco film generally used for soft/hard tobacco pack and used for modern high/slow packing machines.
Transparent biaxially oriented polypropylene cigarette film featured coextruded heat sealable on both sides,incorporated with anti- static protection
Thickness : 18,19,20, 21,22 ,25 Microns
Width: 90,110,118,120,135,150,220,350MM Length:2000M, 2800M,3000M ,3500M
Well-fitting to machine, suitable for high speed packing of all kinds of soft pack. Special hot slip ability on surface,can avoid machine-blocking,sticking etc. Quick heat sealing at low temperature and pressare. Good foldability after forming. Inferior optical properties to others.
High-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. is a general-purpose biaxially oriented polypropylene (BOPP) film. It is produced for buyers who need a film that runs predictably on existing converting equipment and that can be specified in writing against a technical data sheet before the first production run.
Search termsa general-purpose biaxially oriented polypropylene (BOPP) film
The page moves from grade identity to construction, then to the figures that must be fixed in an order, then to processing, packing and the information needed to place an enquiry. Each section can be read on its own or in sequence.
Figures quoted on this page are reference values taken from the manufacturer's own technical documentation. The order confirmation and the attached technical agreement define the binding specification, and where the two differ the agreement prevails.
Where the grade name alone does not identify a specification, use the product code quoted on the page together with the enquiry checklist in the last section. That combination removes the most common cause of a delayed reply: a specification that was agreed in an earlier conversation but not restated in writing.
These entries come from the site's product records and complement the information published above. Figures that vary by grade are confirmed in the order confirmation and the attached technical agreement.
The product is supplied in roll form. The material system is BOPP Film (Polypropylene film). Layer build-up, resin grade and additive package are fixed for each product code and are stated in the technical agreement attached to the order; this page does not publish the formulation.
The grade is built as a biaxially oriented polypropylene core with balanced surface treatment on one or both faces for printing, lamination or heat sealing. Layer order, surface treatment and the face intended for printing, sealing or lamination are set out in the technical data sheet and confirmed against the converter's process before production.
Each production lot is checked against the specification before it is released for packing, and the check record is issued with the shipment documentation.
In practice, the layer structure is what determines how the film behaves on the line: it decides how the film unwinds, how it takes ink or adhesive, and how sealed areas hold. A converter who changes the structure changes the process conditions that worked before, so the structure should be fixed before the line trial, not after it.
| Thickness | 18,19,20, 21,22 ,25 µm |
|---|---|
| Colour | Glossy |
| Packaging | Palletised |
Values as stated for this grade; items not listed here are confirmed in the order confirmation.
Size: 22Microns*105mm*2800M
22Microns*110mm*2800M
22Microns*115mm*2800M
22Microns*118mm*2800M
22Microns*120mm*2800M
22Microns*125mm*2800M
22Microns*130mm*2800M
22Microns*135mm*2800M
22Microns*225mm*2800M
22Microns*350mm*2800M
22Microns*380mm*2800M
22Microns*420mm*2800M
Unit Typical numerical value Testing StandardGrade AEC21 Grade AEC22 Corporate National International
Density g/cm3 0.905 0.905 ASTM D1505
Thickness μm 21 22 Q/SD2 GB/T6672-2001
Unit weight g/m2 19.0 19.9
Yield m2/kg 52.6 50.3
Tensile strength MD N/mm2 160 150 Q/SD2 GB/T1040-1992 ASTM D882TD 287 280
Elongation at break MD % 172 180 Q/SD2 GB/T1040-1992 ASTM D882TD 63 60
Heat shrinkage MD % 3.5 3.2 Q/SD2 GB/T12026-2000 ASTM D1204-89TD 2.8 2.5
Young’s modulus MD N/mm2 2200 1980 Q/SD2 ASTM D882TD 3900 3300
Heat sealing strength N/15mm 2.6 2.7 Q/SD2 QB/T2358-1998 ASTM F88-94
Temperature range of heat sealing °C 120~150 120~150 Q/SD2 QB/T2358-1998 ASTM F88-94
Friction co-efficient 0.20 0.20 Q/SD2 GB/T10006-1988 ASTM D1894-93
Haze % 1.3 1.5 Q/SD2 GB2410-1980 ASTM D1003-95
(45°) Gloss % 85.0 85.0 Q/SD2 GB8807-1988 ASTM D2457
Super high transparency and glossy,Super high tensile strength
Super high grease barrier, Excellent ink and coating adhesion
Low static electricity,Superior thickness uniformity
Smoothness of the vertical section and much compact of film rolls winding
4. Technology data:
TYPICAL VALUES AND PHYSICAL PROPERTIES
Specification of Polypropylene film (PP Film)
Size: 100 mm. * 3,600 m.
Size: 115 mm. * 3,600 m.
Size: 122 mm. * 3,600 m.
1. Type Biaxially Oriented Polypropylene,
Maximum temperature seal does not over than 180 °C
2. Core Inside diameter of core 76mm., Thickness of core 8mm.
The length as width of PP Film
3. Thickness 0.018 – 0.024 mm.
4. Basis Weight 16 – 22 gms./ m²
5. Stiffness Not less than 11mm.
6. Heat – Seal Strength Not less than 300gms
7. Water Vapour Permeability Not over than 10gms/m²/24hours
8. Blocking Resistance Not tightly sealed at a pressure of 35 gms/m²
Period of 24 hours at 40°C, Humidity 40%
9. Odour Odourless
10. Haze Not over than 2.2%
11. Gloss : 45° Not less than 75%
12. General Appearance Tightly rol l
Incision is flat at both sides.
Seamless in the roll. If ne cessary the joints do not exceed
one mark per roll, But not over than 10% of each delivery.
By mark cleanly.
PS. the seller must specify the temperature when use
5. Standard Dimensions
A: Buyer can get our enquiry via Email (all of our email are @boppfilmsale.com), Tel, Fax, On-line Ali-trademanager, Mobile (cellphone) message, Skype,Msn, or any other methods. Please offer us the specification of the product that you need, then we will quote our price to you Within 2 hours during the working time, and within 12 hours during non-working time, and Within 24 hours during the holidays.
4 Asia Pacific -BOPP -Details Specifications Intruduce-Compressed.pdf
| THICKNESS 厚度 | 25 µm |
|---|---|
| SURFACE 表面 | Heat Sealable |
| COLOUR 颜色 | Clear |
| WIDTH 幅宽 | 90 / 110 / 118 / 120 / 135 / 150 MM |
| LENGTH 长度 | 2000M / 2800M / 3000M / 3500 M |
| SIZE 尺寸 | 22 µm*105 mm*2800M 22 µm*110 mm*2800M |
| GLOSS 光泽度 | 45° |
| TENSILE STRENGTH 拉伸强度 | 160 / 150 |
| ELONGATION AT BREAK 断裂伸长 | 172 / 180 |
| SEALING STRENGTH 封合强度 | 2.6 / 2.7 |
Thickness, reel width, reel length, core diameter and the surface treatment level are set per grade. Physical-property figures are supplied as guide values for grade selection; the values agreed in the order confirmation and the attached technical agreement govern supply, and a tolerance band is agreed at the same time.
A tolerance band is agreed alongside the nominal figure because it is the band, not the nominal number, that determines whether a reel runs cleanly through a given machine. The nominal value selects the grade; the tolerance decides whether the line accepts it.
Specification referencesHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. specificationHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. technical data sheetHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. thicknessHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. width
Typical use of this product family: BOPP Film (Polypropylene film).
Typical applications of this product family; final suitability is confirmed against your process.
a.) BOPP cigarette tobacco film generally used for soft/hard tobacco pack and used for modern high/slow packing machines.
transparent biaxially oriented polypropylene cigarette film featured coextruded heat sealable on both sides,incorporated with anti- static protection
Thickness : 18,19,20,21,22,25 Microns
Width: 90,110,118,120,135,150,220,350MM Length:2000M,2800M,3000M,3500M
Well-fitting to machine, suitable for high speed packing of all kinds of soft pack. Special hot slip ability on surface,can avoid machine-blocking,sticking etc. Quick heat sealing at low temperature and pressare. Good foldability after forming. Inferior optical properties to others.
Customer's own requirement is available for us such as printed OEM logos and private label or particular size and package style.
b.) Half-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines.
It is widely used in packaging soft and hard tobacco cigarette packets
BOPP Cigarette Packaging Film — Grade CH21 / CH22
Applications for this grade include flexible packaging for dry goods and snacks, overwrapping and flow-wrap packing, label and wrap films, printed bags and pouches, cigarette and tobacco packaging film. The right grade for a given pack depends on the converting route, the sealing method, the shelf-life target and any regulatory requirement for direct food contact.
Application areasflexible packaging for dry goods and snacksoverwrapping and flow-wrap packinglabel and wrap filmsprinted bags and pouchescigarette and tobacco packaging filmlaminating base film for paper and film
Each of these routes asks something different from the film. Printing needs surface energy and a stable surface; lamination needs bond strength and a stable web; heat sealing needs a defined seal window; and packaging that is filled hot needs barrier performance. The same nominal film can behave very differently across these routes, which is why the application should be stated when the grade is selected.
Where more than one grade appears to fit, the deciding factors are usually the converted performance needed on the line, the pack contents and the applicable regulations. Samples can be supplied for trial before a specification is confirmed.
Typical converting route for a roll of BOPP Film (Polypropylene film): unwind, corona treatment where the downstream process requires it, printing or lamination, slitting to the ordered width, then rewinding on the specified core.
Slitting and rewinding are carried out on lines with edge-trim removal and in-line thickness scanning, so width and gauge are controlled at the rewinder rather than at the extruder.
c.) High-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines.
7 Asia Pacific -BOPP -Heat Seal Tobacco Film EU-Compressed.pdf
This grade is normally processed through slitting and rewinding, flexo and gravure printing, adhesive lamination, thermoforming and bag making, corona treatment. Treated face, sealing temperature window, tension and line speed should be matched to the actual machine during trials, and a trial reel is recommended before a production run.
Processing stepsslitting and rewindingflexo and gravure printingadhesive laminationthermoforming and bag makingcorona treatmenthigh-speed automatic packing
The trial reel is the cheapest way to settle a specification. It exposes the questions that a datasheet cannot answer — how the web behaves at the speed of the line, whether the treated face runs in the right direction, and whether the material holds a seal or takes ink cleanly on this particular machine. A short trial reel answers all three before a full order is committed.
Before the trial, it is worth confirming the treated face, the corona level, the core size and the unwind direction against the machine. These four items are the ones most often left to assumption, and each of them can stop a line without touching the film quality at all.
Every reel is identified by this label. Fields are generated from this page's product data; lot, date and operator fields are left blank to be completed at packing.
Rolls are wound on the core size stated in the specification, protected with edge protectors and stretch wrap, and packed in export cartons or on pallets as agreed per order. Each roll and each pallet carries a label with product code, gauge, width, net weight and roll number.
3. acking: Use carton and kraft paper and bobble film to packing as inner package, and use pallets and wood board to packing as outer package
But also have a specialty sales team of ages experienced international trade business. We can do transportation easily By sea, By air, By trains and by Air-express. Easily transact several transportation methods, such as mixed loading container, less than container loading, full container loading.
Reels are wound on the specified core, wrapped, labelled with the roll label shown below and packed in cartons on pallets for transport. Each reel carries its own roll number and batch mark, and cartons and pallets are marked to match the packing list so that incoming goods can be checked on arrival.
Storage should be dry, shaded and away from heat sources and direct sunlight. Stock should be used in rotation order so that older reels are consumed first. Handling marks on the label follow the export packing standard and apply to the reel as well as to the carton.
The roll label shown below is not decoration: it is the record that ties a physical reel to its specification, and it is what makes a complaint traceable. Keeping the original polyethylene wrapping until the reel is opened protects the edge from damage and keeps dust off the surface, which on thin grades can show up as pinholes in a downstream coating. Rolls that have been unwrapped and re-wrapped should be declared, because the second wrap does not restore the original protection.
On arrival, a quick check against the packing list is worthwhile: reel count, roll numbers, core and width against the order, and the condition of the outer packaging. A short inspection at goods-in is cheaper than discovering a shortage after the line has been set up.
Packing referencesHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. packingHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. roll labelHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. export packing
Minimum order quantity, lead time, packing configuration and delivery terms are set per order according to specification, quantity and production schedule. Send the specification you need to the export team and we will confirm availability, packing and lead time in writing.
A: We have high-advanced production equipment to ensure the quality of buyer’s order. Meanwhile there is a dedicated design team to help with the sample artwork for free. On the other hand your design will be 100% safe under NDA.
A: Yes, you can get available sample in our stock. Free for samples, but shipping fees is for buyer’s account. And after firm order, we will return the shipping fees to buyers or deduct the shipping fees from buyer’s firm order payment.
Yes, We can. And we can accept the payment currency, such as: USD, EUR,HKD,GBP,JPY,AUD,RMB(CNY) and so forth.
By the way, please highly noted: because many risks when buyer remite the payment to seller, for example, The network hacker: seller issue the PI ( Proforma invoice) to buyer, but when buyer send the advance deposit payment to seller, seller’s bank account was informed being changed, and let buyer send to the seller’s other nominated bank account. After seller send the payment to buyer, he won’t find the receptor forever. This is risk,.
Available gauge, width, length, packing method and delivery schedule are confirmed in writing against each enquiry. Minimum order quantity, lead time, the documents accompanying the shipment and the payment terms are agreed before the order is placed, so that both sides work from the same written record.
Commercial points are settled in writing for a practical reason: film orders are usually produced against a confirmed specification, and a change of gauge, width or reel length after production starts cannot be absorbed. Written confirmation before the order is placed is what keeps the schedule and the specification aligned.
Delivery times should be read as production windows rather than fixed dates, because they depend on the specification being confirmed, the line schedule and the quantity. Where a date is fixed — a promotion, a shipping deadline or a trial date — say so in the enquiry and it can be planned against.
Commercial referencesHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. MOQHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. lead timeHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. supplier
Which gauges can you supply?
Gauges stated in the specification above, for example: Thickness : 18,19,20, 21,22 ,25 Microns.
Is the roll joint-free and what is the roll length?
Rolls are wound without joints inside the roll unless a splice is agreed in writing; roll length follows the specification table.
What is the MOQ and lead time?
MOQ and lead time depend on gauge, width and quantity, and are confirmed when the order is placed.
Gauges stated in the specification above, for example: Thickness : 18,19,20, 21,22 ,25 Microns.
Rolls are wound without joints inside the roll unless a splice is agreed in writing; roll length follows the specification table.
MOQ and lead time depend on gauge, width and quantity, and are confirmed when the order is placed.
•Good after-sale service offered. Please feel free to contact us if you have any more information or question.
These are the points that come up most often before an order is placed. Each answer refers to the figures and documents shown elsewhere on this page, so a buyer can check the wording against the specification before writing.
Browse the whole family: BOPP Film (Polypropylene film).
•Your inquiry related to our product & price will be replied within 24 hours.
Grades used on the same converting lines are listed with this page so that a buyer can compare construction and specification before selecting. Test reports, compliance certificates and material safety data sheets are issued per shipment and can be requested in advance when an incoming-goods procedure requires them.
Comparing grades on the same line is useful for a second reason: it narrows the conversation. If the alternatives and their differences are already documented, the enquiry can start from a shortlist instead of from a blank specification, and the reply can be faster and more precise.
Documents are issued per shipment. If your incoming-goods procedure requires a document before the goods arrive, say so in the enquiry and it can be sent in advance.
Related searchesBOPP Film (Polypropylene film)flexible packaging for dry goods and snacksoverwrapping and flow-wrap packinglabel and wrap filmsprinted bags and pouches
Please state the grade and product code, the required thickness, width, reel length and core, the treated face, the intended machine and application, the quantity, the packing requirement, the destination and the required delivery date. These details allow a written confirmation to be prepared without repeated clarification.
A complete first enquiry is the fastest route to a written confirmation. The items that most often have to be asked for again are the treated face, the core size and the reel length, because they are frequently assumed rather than stated — and each of them changes what can be offered.
Enquiry referencesHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. enquiryHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. quotationHigh-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines. price
3.) Specific property
2. Usage
4. Featuring :
OUR SERVICE
•Well-trained & experiencd staff are ready to answer all your inquiries in English or other language.
•Working time: 8:30am – 17:30pm, Monday to Friday (UTC+8).
•Your business relationship with us will be confidential to any third party.
Q1: Are you A Manufacturer or A Trading Company?
A: we are not only More than ten years professional manufacturer and this is our factory's own import and export company. Mainly deal with oversea market’s exporting business!
Here you’ll find up: Highly active, very convenient, professional specialty, vitality and vigor, zero-distance service!
Q2: Can you OEM and ODM?
Q3: Can we get some samples from factory?
Q4: Can you accept the major currencies all over the world?
So here we declare to all of our buyers:
Q5: How to control your quantity and quality?
A. 1) A complete quality guarantee system: IQC→ FAS & Self-checking for each process→ OQC;
2) IS09001: 2008 system, SGS, BV.COTECNA, SONCAP approved
3.) Third parties to inspection
Q6: How can we get a quote?
6 Asia Pacific -BOPP -Poly Film Packet - Buyer Requirement-Compressed.pdf
Email: sales@boppfilmsales.com, admin@apigcl.com · Whatsapp/Wechat/Mobile: +86-18919654871
I need send an email to the seller
| 产品编码 | APIG-BPP-018 |
|---|---|
| H.S. 编码 | 3920209090 |
| 所属分类 | BOPP Film (Polypropylene film) |
A.) BOPP cigarette tobacco film generally used for soft/hard tobacco pack and used for modern high/slow packing machines.
Transparent biaxially oriented polypropylene cigarette film featured coextruded heat sealable on both sides,incorporated with anti- static protection
Thickness : 18,19,20, 21,22 ,25 Microns
Width: 90,110,118,120,135,150,220,350MM Length:2000M, 2800M,3000M ,3500M
Well-fitting to machine, suitable for high speed packing of all kinds of soft pack. Special hot slip ability on surface,can avoid machine-blocking,sticking etc. Quick heat sealing at low temperature and pressare. Good foldability after forming. Inferior optical properties to others.
BOPP高收缩香烟盒包装膜 为a general-purpose biaxially oriented polypropylene (BOPP) film。本产品面向需要在既有加工设备上稳定运行、并在量产前以技术资料单书面固化规格的采购方。
产品关键词a general-purpose biaxially oriented polypropylene (BOPP) film
本页依次说明牌号身份、构造、必须在下单时锁定的数值、加工方式、包装与询价信息。每一段既可独立阅读，也可顺序阅读。
本页所列数值均为原厂技术文件中的参考值。具有合同效力的规格以订单确认与随附技术协议为准，两者不一致时以技术协议为准。
若仅凭牌号名称不足以确定规格，请将本页的产品编码与末段询价清单一并提供。这是回复延迟最常见的原因 —— 规格在前期沟通中谈定，却未在书面信息中重申。
本产品以卷材形式供货，材料体系为 BOPP薄膜（聚丙烯薄膜）。层结构、树脂牌号与助剂配方按每个产品编号固定，并写入随订单的技术协议；本页不公布配方细节。
本牌号结构为a biaxially oriented polypropylene core with balanced surface treatment on one or both faces for printing, lamination or heat sealing。层序、表面处理以及用于印刷、热封或复合的处理面，均在技术资料单中列明，并于投产前与加工方的工艺流程核对确认。
每个生产批次在放行包装前均对照规格检验，检验记录随货文件一并签发。
实际生产中，层结构直接决定薄膜在产线上的表现：放卷是否顺畅、油墨与胶黏剂能否附着、封口能否保持稳定，都由此决定。转换方一旦改变结构，先前有效的工艺条件也会随之失效，因此结构应在试机之前确定，而不是试机之后再改。
| 厚度 | 18,19,20, 21,22 ,25 µm |
|---|---|
| 颜色 | Glossy |
| 包装 | Palletised |
以上为本牌号规格，未列项按订单确认。
Size: 22Microns*105mm*2800M
22Microns*110mm*2800M
22Microns*115mm*2800M
22Microns*118mm*2800M
22Microns*120mm*2800M
22Microns*125mm*2800M
22Microns*130mm*2800M
22Microns*135mm*2800M
22Microns*225mm*2800M
22Microns*350mm*2800M
22Microns*380mm*2800M
22Microns*420mm*2800M
Unit Typical numerical value Testing StandardGrade AEC21 Grade AEC22 Corporate National International
Density g/cm3 0.905 0.905 ASTM D1505
Thickness μm 21 22 Q/SD2 GB/T6672-2001
Unit weight g/m2 19.0 19.9
Yield m2/kg 52.6 50.3
Tensile strength MD N/mm2 160 150 Q/SD2 GB/T1040-1992 ASTM D882TD 287 280
Elongation at break MD % 172 180 Q/SD2 GB/T1040-1992 ASTM D882TD 63 60
Heat shrinkage MD % 3.5 3.2 Q/SD2 GB/T12026-2000 ASTM D1204-89TD 2.8 2.5
Young’s modulus MD N/mm2 2200 1980 Q/SD2 ASTM D882TD 3900 3300
Heat sealing strength N/15mm 2.6 2.7 Q/SD2 QB/T2358-1998 ASTM F88-94
Temperature range of heat sealing °C 120~150 120~150 Q/SD2 QB/T2358-1998 ASTM F88-94
Friction co-efficient 0.20 0.20 Q/SD2 GB/T10006-1988 ASTM D1894-93
Haze % 1.3 1.5 Q/SD2 GB2410-1980 ASTM D1003-95
(45°) Gloss % 85.0 85.0 Q/SD2 GB8807-1988 ASTM D2457
Super high transparency and glossy,Super high tensile strength
Super high grease barrier, Excellent ink and coating adhesion
Low static electricity,Superior thickness uniformity
Smoothness of the vertical section and much compact of film rolls winding
4. Technology data:
TYPICAL VALUES AND PHYSICAL PROPERTIES
Specification of Polypropylene film (PP Film)
Size: 100 mm. * 3,600 m.
Size: 115 mm. * 3,600 m.
Size: 122 mm. * 3,600 m.
1. Type Biaxially Oriented Polypropylene,
Maximum temperature seal does not over than 180 °C
2. Core Inside diameter of core 76mm., Thickness of core 8mm.
The length as width of PP Film
3. Thickness 0.018 – 0.024 mm.
4. Basis Weight 16 – 22 gms./ m²
5. Stiffness Not less than 11mm.
6. Heat – Seal Strength Not less than 300gms
7. Water Vapour Permeability Not over than 10gms/m²/24hours
8. Blocking Resistance Not tightly sealed at a pressure of 35 gms/m²
Period of 24 hours at 40°C, Humidity 40%
9. Odour Odourless
10. Haze Not over than 2.2%
11. Gloss : 45° Not less than 75%
12. General Appearance Tightly rol l
Incision is flat at both sides.
Seamless in the roll. If ne cessary the joints do not exceed
one mark per roll, But not over than 10% of each delivery.
By mark cleanly.
PS. the seller must specify the temperature when use
5. Standard Dimensions
A: Buyer can get our enquiry via Email (all of our email are @boppfilmsale.com), Tel, Fax, On-line Ali-trademanager, Mobile (cellphone) message, Skype,Msn, or any other methods. Please offer us the specification of the product that you need, then we will quote our price to you Within 2 hours during the working time, and within 12 hours during non-working time, and Within 24 hours during the holidays.
4 Asia Pacific -BOPP -Details Specifications Intruduce-Compressed.pdf
| THICKNESS 厚度 | 25 µm |
|---|---|
| SURFACE 表面 | Heat Sealable |
| COLOUR 颜色 | Clear |
| WIDTH 幅宽 | 90 / 110 / 118 / 120 / 135 / 150 MM |
| LENGTH 长度 | 2000M / 2800M / 3000M / 3500 M |
| SIZE 尺寸 | 22 µm*105 mm*2800M 22 µm*110 mm*2800M |
| GLOSS 光泽度 | 45° |
| TENSILE STRENGTH 拉伸强度 | 160 / 150 |
| ELONGATION AT BREAK 断裂伸长 | 172 / 180 |
| SEALING STRENGTH 封合强度 | 2.6 / 2.7 |
厚度、分切幅宽、卷长、纸芯内径与表面处理值按牌号分别规定。物理性能数据用于选型参考；具有合同效力的数值以订单确认与随附技术协议为准，公差范围同时约定。
公差范围与标称值同时约定，是因为决定一卷薄膜能否在某台设备上顺畅运行的，是公差带而不是标称值。标称值用于选型，公差决定产线是否接收。
规格检索词BOPP高收缩香烟盒包装膜 规格BOPP高收缩香烟盒包装膜 技术资料BOPP高收缩香烟盒包装膜 厚度BOPP高收缩香烟盒包装膜 幅宽
本品类的典型用途：BOPP薄膜（聚丙烯薄膜）。
以上为本品类的典型应用，最终适用性以您的工艺确认为准。
a.) BOPP cigarette tobacco film generally used for soft/hard tobacco pack and used for modern high/slow packing machines.
transparent biaxially oriented polypropylene cigarette film featured coextruded heat sealable on both sides,incorporated with anti- static protection
Thickness : 18,19,20,21,22,25 Microns
Width: 90,110,118,120,135,150,220,350MM Length:2000M,2800M,3000M,3500M
Well-fitting to machine, suitable for high speed packing of all kinds of soft pack. Special hot slip ability on surface,can avoid machine-blocking,sticking etc. Quick heat sealing at low temperature and pressare. Good foldability after forming. Inferior optical properties to others.
Customer's own requirement is available for us such as printed OEM logos and private label or particular size and package style.
b.) Half-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines.
It is widely used in packaging soft and hard tobacco cigarette packets
BOPP Cigarette Packaging Film — Grade CH21 / CH22
本牌号的典型应用包括flexible packaging for dry goods and snacks、overwrapping and flow-wrap packing、label and wrap films、printed bags and pouches、cigarette and tobacco packaging film。具体包材应选用哪个牌号，取决于加工路线、封合方式、保质期目标，以及是否涉及直接接触食品的法规要求。
应用领域flexible packaging for dry goods and snacksoverwrapping and flow-wrap packinglabel and wrap filmsprinted bags and pouchescigarette and tobacco packaging filmlaminating base film for paper and film
不同加工路线对薄膜的要求并不相同。印刷看重表面能与表面平整度；复合看重粘合强度与走卷稳定性；热封看重明确的热封温度区间；内容物为热填充的包装还要求阻隔性能。同一标称薄膜在不同路线上的表现可能相差很大，因此选型时应说明最终用途。
当多个牌号都看似适用时，决定因素通常是产线所需的加工性能、内容物特性与适用法规。在确定规格前可提供样品试机。
BOPP薄膜（聚丙烯薄膜） 的典型加工路线：放卷、按后道需要做电晕处理、印刷或复合、按订单幅宽分切、按指定纸芯复卷。
分切复卷线配有修边与在线测厚，幅宽与厚度在复卷端控制，厚度公差以出厂检验单为准。
c.) High-Shrinkage BOPP Cigarette Film With Heat Sealable Matches High-Speed Packaging Machines.
7 Asia Pacific -BOPP -Heat Seal Tobacco Film EU-Compressed.pdf
本牌号通常经slitting and rewinding、flexo and gravure printing、adhesive lamination、thermoforming and bag making、corona treatment等工序加工。处理面、热封温度窗口、张力与产线速度应在试机时按实际设备匹配确认，建议批量投产前先试一卷。
加工工序slitting and rewindingflexo and gravure printingadhesive laminationthermoforming and bag makingcorona treatmenthigh-speed automatic packing
试机卷是确定规格最经济的办法。数据表无法回答的问题，它都能回答：薄膜在该产线速度下的走卷表现、处理面方向是否与设备匹配、以及材料在特定设备上封口是否牢靠、上墨是否干净。一小卷试机即可在整单承诺之前厘清这三件事。
试机之前，建议先就处理面、电晕值、纸芯规格与放卷方向与设备逐项确认。这四项最常被想当然地略过，而其中任何一项都可能让产线停机，却与薄膜本身的质量无关。
每一卷均由本标签标识。标签字段由本页产品数据自动生成；批号、日期与操作员字段留空，供包装现场填写。
卷材按规格表所列纸芯收卷，加护边与缠绕膜，按订单约定装出口纸箱或上托盘。每卷与每托贴标签，注明产品编号、厚度、幅宽、净重与卷号。
3. acking: Use carton and kraft paper and bobble film to packing as inner package, and use pallets and wood board to packing as outer package
But also have a specialty sales team of ages experienced international trade business. We can do transportation easily By sea, By air, By trains and by Air-express. Easily transact several transportation methods, such as mixed loading container, less than container loading, full container loading.
卷材按指定纸芯收卷，经包裹、贴附下方所示卷标后装入纸箱并码放托盘运输。每卷均有独立卷号与批次标识，纸箱与托盘外标依装箱单制作，便于到货核对。
储存应保持干燥、避光，远离热源与阳光直射。库存建议按先进先出使用，优先消化较早批次。标签上的搬运标识遵循出口包装标准，同时适用于整卷与外箱。
下方所示的卷标并非装饰，而是把实物卷材与其规格对应起来的凭据，也是投诉可追溯的基础。在开卷前保留原聚乙烯包装，可以防止边缘受损并隔绝灰尘；在薄膜偏薄的牌号上，灰尘会在后续涂布中形成针孔。已经拆包再复卷的卷材应予说明，因为二次包装无法还原原有防护。
到货时对照装箱单做一次快速核对是值得的：卷数、卷号、纸芯与幅宽是否与订单一致，外包装是否完好。来料检验环节花几分钟，远比产线已经开机后才发现缺卷要划算。
起订量、交期、包装方式与交货条款按规格、数量与排产逐单确认。请把所需规格发给出品部，我们会书面回复可供规格、包装与交期。
A: We have high-advanced production equipment to ensure the quality of buyer’s order. Meanwhile there is a dedicated design team to help with the sample artwork for free. On the other hand your design will be 100% safe under NDA.
A: Yes, you can get available sample in our stock. Free for samples, but shipping fees is for buyer’s account. And after firm order, we will return the shipping fees to buyers or deduct the shipping fees from buyer’s firm order payment.
Yes, We can. And we can accept the payment currency, such as: USD, EUR,HKD,GBP,JPY,AUD,RMB(CNY) and so forth.
By the way, please highly noted: because many risks when buyer remite the payment to seller, for example, The network hacker: seller issue the PI ( Proforma invoice) to buyer, but when buyer send the advance deposit payment to seller, seller’s bank account was informed being changed, and let buyer send to the seller’s other nominated bank account. After seller send the payment to buyer, he won’t find the receptor forever. This is risk,.
可供厚度、幅宽、卷长、包装方式与交期按每笔询盘书面确认。起订量、交货周期、随货文件与付款条件在下单前双方约定，确保双方依据同一份书面记录执行。
商务条件以书面确认为实，是因为薄膜订单通常按已确认的规格投产，而一旦开机之后再变更厚度、幅宽或卷长，是无法吸收的。下单前的书面确认，才是让交期与规格保持一致的保障。
交期应理解为生产窗口而非固定日期，因为它取决于规格确认时间、产线排期与订单数量。若确有固定日期要求（促销节点、船期或试机日期），请在询盘中注明，便于据此安排。
可以供哪些厚度／规格？
以上规格段所列，例如：Thickness : 18,19,20, 21,22 ,25 Microns。
整卷是否无接头，卷长多少？
整卷内部不设接头，如需接头须书面约定；卷长按规格表执行。
起订量与交期是多少？
起订量与交期取决于厚度、幅宽与数量，下单时确认。
以上规格段所列，例如：Thickness : 18,19,20, 21,22 ,25 Microns。
整卷内部不设接头，如需接头须书面约定；卷长按规格表执行。
起订量与交期取决于厚度、幅宽与数量，下单时确认。
•Good after-sale service offered. Please feel free to contact us if you have any more information or question.
以下是下单前最常确认的问题。每一项答复都指向本页其它位置给出的数据与文件，便于采购方在书面沟通前先与规格逐条对照。
•Your inquiry related to our product & price will be replied within 24 hours.
本页列出同一加工线常用的相关牌号，便于采购方在选型前对比构造与规格。检测报告、合规证书与物质安全资料表按批次随货签发；若来料检验流程需要，可在发货前先行索取。
对比同一产线上的相关牌号还有第二个用处：它能缩短沟通路径。当备选牌号及其差异已有记录时，询盘可以从一份候选清单开始，而不是从一张空白规格表开始，回复也因此更快、更准确。
文件按批次随货签发。若贵方来料检验流程要求货物到货前先收到文件，请在询盘中说明，可提前提供。
相关检索BOPP薄膜（聚丙烯薄膜）flexible packaging for dry goods and snacksoverwrapping and flow-wrap packinglabel and wrap filmsprinted bags and pouches
询价时请提供：牌号与产品编码、所需厚度、幅宽、卷长与纸芯规格、处理面、拟用机型与用途、数量、包装要求、目的地及期望交期。提供这些信息可直接进入书面确认环节，减少往返澄清。
信息完整的首次询盘，是拿到书面确认最快的路径。最常被反复追问的三项是处理面、纸芯规格与卷长，原因是它们常被想当然地略过而未写明 —— 而这三项都会直接改变可供方案。
3.) Specific property
2. Usage
4. Featuring :
OUR SERVICE
•Well-trained & experiencd staff are ready to answer all your inquiries in English or other language.
•Working time: 8:30am – 17:30pm, Monday to Friday (UTC+8).
•Your business relationship with us will be confidential to any third party.
Q1: Are you A Manufacturer or A Trading Company?
A: we are not only More than ten years professional manufacturer and this is our factory's own import and export company. Mainly deal with oversea market’s exporting business!
Here you’ll find up: Highly active, very convenient, professional specialty, vitality and vigor, zero-distance service!
Q2: Can you OEM and ODM?
Q3: Can we get some samples from factory?
Q4: Can you accept the major currencies all over the world?
So here we declare to all of our buyers:
Q5: How to control your quantity and quality?
A. 1) A complete quality guarantee system: IQC→ FAS & Self-checking for each process→ OQC;
2) IS09001: 2008 system, SGS, BV.COTECNA, SONCAP approved
3.) Third parties to inspection
Q6: How can we get a quote?
6 Asia Pacific -BOPP -Poly Film Packet - Buyer Requirement-Compressed.pdf
邮箱: sales@boppfilmsales.com, admin@apigcl.com · Whatsapp/Wechat/Mobile: +86-18919654871
我需要给卖家发送邮件
