Welcome to our websitewww.boppfilmsales.com & www.apigcl.com
API-210-1600 slits and rewinds BOPP jumbo tape rolls into 3-inch-core carton sealing tape, with pneumatic unwinding tension and four rewinding shafts.
| Product code | APIG-MCH-002 |
|---|---|
| H.S. code | 8477800000 |
| Category | BOPP Film |
A jumbo-roll slitter rewinder for carton packing tape: 1580 mm working width, 600 mm unwinding diameter, razor slitting down to 12 mm and four 3-inch rewinding shafts.
API-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE is a BOPP thermal laminating film for paper, board and flexible packaging lamination. It is produced for buyers who need a film that runs predictably on existing converting equipment and that can be specified in writing against a technical data sheet before the first production run.
Search termsa BOPP thermal laminating film for paper, board and flexible packaging lamination
The page moves from grade identity to construction, then to the figures that must be fixed in an order, then to processing, packing and the information needed to place an enquiry. Each section can be read on its own or in sequence.
Figures quoted on this page are reference values taken from the manufacturer's own technical documentation. The order confirmation and the attached technical agreement define the binding specification, and where the two differ the agreement prevails.
Where the grade name alone does not identify a specification, use the product code quoted on the page together with the enquiry checklist in the last section. That combination removes the most common cause of a delayed reply: a specification that was agreed in an earlier conversation but not restated in writing.
These entries come from the site's product records and complement the information published above. Figures that vary by grade are confirmed in the order confirmation and the attached technical agreement.
Steel-plate machine body with unwinding station, 3-inch pneumatic shaft, razor slitting head, four rewinding shafts and a button control panel.
The grade is built as a biaxially oriented polypropylene core with an ethylene copolymer heat-seal layer and a treated outer face for print and adhesion. Layer order, surface treatment and the face intended for printing, sealing or lamination are set out in the technical data sheet and confirmed against the converter's process before production.
Each production lot is checked against the specification before it is released for packing, and the check record is issued with the shipment documentation.
In practice, the layer structure is what determines how the film behaves on the line: it decides how the film unwinds, how it takes ink or adhesive, and how sealed areas hold. A converter who changes the structure changes the process conditions that worked before, so the structure should be fixed before the line trial, not after it.
| Core | 3″ (76 mm) |
|---|
Values as stated for this grade; items not listed here are confirmed in the order confirmation.
| Property | Specification |
|---|---|
| Model | Type 1300 / API-210-1600 (per machine) |
| Machine width | 1,300 - 1,600 mm |
| Speed | 20 - 120 m/min (per configuration) |
| Applicable material | BOPP / BOPET / CPP / PE film |
| Power supply | 380 V, 3 phase (configurable) |
| Control | PLC with touch screen |
| Scope | Supply, installation, commissioning and training |
| Application | Slitting and rewinding of film rolls for tape and packaging converters |
| WIDTH 幅宽 | 1580 mm |
|---|---|
| COLOUR 颜色 | Clear |
| PRODUCT TYPE 产品类型 | BOPP Film / BOPP薄膜 |
Thickness, reel width, reel length, core diameter and the surface treatment level are set per grade. Physical-property figures are supplied as guide values for grade selection; the values agreed in the order confirmation and the attached technical agreement govern supply, and a tolerance band is agreed at the same time.
A tolerance band is agreed alongside the nominal figure because it is the band, not the nominal number, that determines whether a reel runs cleanly through a given machine. The nominal value selects the grade; the tolerance decides whether the line accepts it.
Specification referencesAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE specificationAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE technical data sheetAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE thicknessAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE width
Used to convert BOPP jumbo rolls into 3-inch carton sealing tape for packing lines and tape converters.
Application fits are typical industry uses; grade and dimensions are confirmed against your line.
Applications for this grade include paper and carton lamination, book and magazine binding, food-pack flexible lamination, label and wrapping lamination, gifting and craft paper lamination. The right grade for a given pack depends on the converting route, the sealing method, the shelf-life target and any regulatory requirement for direct food contact.
Application areaspaper and carton laminationbook and magazine bindingfood-pack flexible laminationlabel and wrapping laminationgifting and craft paper laminationmetallised and barrier structures
Each of these routes asks something different from the film. Printing needs surface energy and a stable surface; lamination needs bond strength and a stable web; heat sealing needs a defined seal window; and packaging that is filled hot needs barrier performance. The same nominal film can behave very differently across these routes, which is why the application should be stated when the grade is selected.
Where more than one grade appears to fit, the deciding factors are usually the converted performance needed on the line, the pack contents and the applicable regulations. Samples can be supplied for trial before a specification is confirmed.
Loading. Mount the jumbo roll on the 3-inch pneumatic shaft and set the brake tension.
Slitting. Set razor spacing to the finished width; minimum strip 12 mm.
Rewinding. Four shafts run together; core loading and cutting are supported by the auxiliary units.
Site requirements. 380 V / 50 Hz supply and 5 kg/cm² air.
API-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE
FOR making 3inch inner diameter carton packing tape
=================================
SPECIFICATIONS & DEVICES LISTING
Technical parameters：
材料最大宽度Material working width：≤1580mm
材料最大直径unwinding diameter： ≤600mm
最小分切宽度mini slitting width： ≥12mm
塑管内径 core inner diameter： ￠3”
机械速度machine speed: ≤180mm/min
使用电源power ： 380V／50Hz
使用空压源air compressor: 5Kg/cm2
Machine front 配置说明：
Final tapes Devices 配置内容
MACHINE STRUCTURE DETAILS配置内容 数量 QTY备注NOTES
放卷机构 unwinding station 1inch steel board, strong machine body ,heavy machine1set
原料轴Unwinding shaft 3寸机械轴 3inch steel shaft with cones at each side 1set
放卷张力 Unwinding tension 气动盘刹 Pneumatic break 1set
张力调节Tension control 手动张力调节 manual1set
放料压轮Pressure roller 摆臂式压轮机构Swing type air cylinders With air filteration oil
压力源 Air meter 1set主电机 Motor
主机调速 Speed adjustAC马达4HP(3KW) main motor 4kw 1set
变频调速Inverter 1set
换卷机构Shafts rotation
换卷电机 Rotation motor
换卷减速机Rrotation Speed reducerAC
马达传动减速机 Ac motor 0.37KW with speed reducer 1set
收卷机构 rewinding Station Slitting razor 1000pcsAlong with order
卷取轴Rewinding shafts 3inch 4pcs
废料收卷机构 Unused materials rewinding 1set
Swing rewinding Movable 移动收废边
操作面板Operation interface
按键式操作面板Button control panel1套set
配套设备 Auxiliary machines
穿纸管机 core loader 1set
配套设备 Auxiliary machines
Auto core cutter 1set .
cutting blades 10PCS，
the cutting shaft cover ,1pc one machine,5pcs extra。
total 6pcs along with order .
配套设备 Auxiliary machinesDoctor rewinder 1台set
模具Mould Size ordered 2套sets ( SIZE ORDERED)
客户自备 Customer supply
空压机 Air compressor 7.5kw suggested 1套set
This grade is normally processed through heat lamination, metallisation, bag making, slitting and rewinding, corona treatment. Treated face, sealing temperature window, tension and line speed should be matched to the actual machine during trials, and a trial reel is recommended before a production run.
Processing stepsheat laminationmetallisationbag makingslitting and rewindingcorona treatmenthigh-speed lamination lines
The trial reel is the cheapest way to settle a specification. It exposes the questions that a datasheet cannot answer — how the web behaves at the speed of the line, whether the treated face runs in the right direction, and whether the material holds a seal or takes ink cleanly on this particular machine. A short trial reel answers all three before a full order is committed.
Before the trial, it is worth confirming the treated face, the corona level, the core size and the unwind direction against the machine. These four items are the ones most often left to assumption, and each of them can stop a line without touching the film quality at all.
Every reel is identified by this label. Fields are generated from this page's product data; lot, date and operator fields are left blank to be completed at packing.
T
h
e
m
a
c
h
i
n
e
s
h
i
p
s
i
n
e
x
p
o
r
t
p
a
c
k
i
n
g
;
t
h
e
w
o
o
d
e
n
c
a
s
e
l
a
y
o
u
t
,
c
r
a
n
e
p
o
i
n
t
s
a
n
d
c
o
m
m
i
s
s
i
o
n
i
n
g
s
u
p
p
o
r
t
a
r
e
a
g
r
e
e
d
p
e
r
o
r
d
e
r
.
Reels are wound on the specified core, wrapped, labelled with the roll label shown below and packed in cartons on pallets for transport. Each reel carries its own roll number and batch mark, and cartons and pallets are marked to match the packing list so that incoming goods can be checked on arrival.
Storage should be dry, shaded and away from heat sources and direct sunlight. Stock should be used in rotation order so that older reels are consumed first. Handling marks on the label follow the export packing standard and apply to the reel as well as to the carton.
The roll label shown below is not decoration: it is the record that ties a physical reel to its specification, and it is what makes a complaint traceable. Keeping the original polyethylene wrapping until the reel is opened protects the edge from damage and keeps dust off the surface, which on thin grades can show up as pinholes in a downstream coating. Rolls that have been unwrapped and re-wrapped should be declared, because the second wrap does not restore the original protection.
On arrival, a quick check against the packing list is worthwhile: reel count, roll numbers, core and width against the order, and the condition of the outer packaging. A short inspection at goods-in is cheaper than discovering a shortage after the line has been set up.
Packing referencesAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE packingAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE roll labelAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE export packing
Carton sealing tape is still converted on slitter rewinders like this one, so demand follows packing-tape consumption in e-commerce and logistics.
Machine specification, delivery and payment terms are agreed in the written enquiry and order confirmation.
Available gauge, width, length, packing method and delivery schedule are confirmed in writing against each enquiry. Minimum order quantity, lead time, the documents accompanying the shipment and the payment terms are agreed before the order is placed, so that both sides work from the same written record.
Commercial points are settled in writing for a practical reason: film orders are usually produced against a confirmed specification, and a change of gauge, width or reel length after production starts cannot be absorbed. Written confirmation before the order is placed is what keeps the schedule and the specification aligned.
Delivery times should be read as production windows rather than fixed dates, because they depend on the specification being confirmed, the line schedule and the quantity. Where a date is fixed — a promotion, a shipping deadline or a trial date — say so in the enquiry and it can be planned against.
Commercial referencesAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE MOQAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE lead timeAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE supplier
What is the working width and speed?
≤1580 mm working width, ≤600 mm unwinding diameter, machine speed ≤180 m/min.
What utilities are needed?
380 V / 50 Hz power and 5 kg/cm² compressed air; the main motor is 4 kW.
MOQ and lead time?
One machine; lead time is stated in the order confirmation and depends on the configuration.
What is the working width and speed?
≤1580 mm working width, ≤600 mm unwinding diameter, machine speed ≤180 m/min.
What utilities are needed?
380 V / 50 Hz power and 5 kg/cm² compressed air; the main motor is 4 kW.
MOQ and lead time?
One machine; lead time is stated in the order confirmation and depends on the configuration.
These are the points that come up most often before an order is placed. Each answer refers to the figures and documents shown elsewhere on this page, so a buyer can check the wording against the specification before writing.
Grades used on the same converting lines are listed with this page so that a buyer can compare construction and specification before selecting. Test reports, compliance certificates and material safety data sheets are issued per shipment and can be requested in advance when an incoming-goods procedure requires them.
Comparing grades on the same line is useful for a second reason: it narrows the conversation. If the alternatives and their differences are already documented, the enquiry can start from a shortlist instead of from a blank specification, and the reply can be faster and more precise.
Documents are issued per shipment. If your incoming-goods procedure requires a document before the goods arrive, say so in the enquiry and it can be sent in advance.
Related searchesBOPP Filmpaper and carton laminationbook and magazine bindingfood-pack flexible laminationlabel and wrapping lamination
Send tape width, jumbo roll size, core type, output target, site power and air supply; the machine configuration follows.
Please state the grade and product code, the required thickness, width, reel length and core, the treated face, the intended machine and application, the quantity, the packing requirement, the destination and the required delivery date. These details allow a written confirmation to be prepared without repeated clarification.
A complete first enquiry is the fastest route to a written confirmation. The items that most often have to be asked for again are the treated face, the core size and the reel length, because they are frequently assumed rather than stated — and each of them changes what can be offered.
Enquiry referencesAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE enquiryAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE quotationAPI-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE price
Email: sales@boppfilmsales.com, admin@apigcl.com · Whatsapp/Wechat/Mobile: +86-18919654871
I need send an email to the seller
API-210-1600 把 BOPP 大卷分切复卷为 3 寸纸芯封箱胶带，放卷气动张力、四根收卷轴。
| 产品编码 | APIG-MCH-002 |
|---|---|
| H.S. 编码 | 8477800000 |
| 所属分类 | BOPP Film |
用于封箱胶带的大卷分切复卷机：有效宽度 1580 mm，放卷直径 600 mm，刀片分切最窄 12 mm，四根 3 寸收卷轴。
API-210-1600型BOPP胶带母卷分切复卷机 为a BOPP thermal laminating film for paper, board and flexible packaging lamination。本产品面向需要在既有加工设备上稳定运行、并在量产前以技术资料单书面固化规格的采购方。
产品关键词a BOPP thermal laminating film for paper, board and flexible packaging lamination
本页依次说明牌号身份、构造、必须在下单时锁定的数值、加工方式、包装与询价信息。每一段既可独立阅读，也可顺序阅读。
本页所列数值均为原厂技术文件中的参考值。具有合同效力的规格以订单确认与随附技术协议为准，两者不一致时以技术协议为准。
若仅凭牌号名称不足以确定规格，请将本页的产品编码与末段询价清单一并提供。这是回复延迟最常见的原因 —— 规格在前期沟通中谈定，却未在书面信息中重申。
以上条目取自网站后台产品档案，与本页已公示内容互补；随牌号变化的数值以订单确认书与随附技术协议为准。
钢板机身配放卷工位、3 寸气动轴、刀片分切头、四根收卷轴与按键式控制面板。
本牌号结构为a biaxially oriented polypropylene core with an ethylene copolymer heat-seal layer and a treated outer face for print and adhesion。层序、表面处理以及用于印刷、热封或复合的处理面，均在技术资料单中列明，并于投产前与加工方的工艺流程核对确认。
每个生产批次在放行包装前均对照规格检验，检验记录随货文件一并签发。
实际生产中，层结构直接决定薄膜在产线上的表现：放卷是否顺畅、油墨与胶黏剂能否附着、封口能否保持稳定，都由此决定。转换方一旦改变结构，先前有效的工艺条件也会随之失效，因此结构应在试机之前确定，而不是试机之后再改。
| 纸芯 | 3″ (76 mm) |
|---|
以上为本牌号规格，未列项按订单确认。
| Property | Specification |
|---|---|
| Model | Type 1300 / API-210-1600 (per machine) |
| Machine width | 1,300 - 1,600 mm |
| Speed | 20 - 120 m/min (per configuration) |
| Applicable material | BOPP / BOPET / CPP / PE film |
| Power supply | 380 V, 3 phase (configurable) |
| Control | PLC with touch screen |
| Scope | Supply, installation, commissioning and training |
| Application | Slitting and rewinding of film rolls for tape and packaging converters |
| WIDTH 幅宽 | 1580 mm |
|---|---|
| COLOUR 颜色 | Clear |
| PRODUCT TYPE 产品类型 | BOPP Film / BOPP薄膜 |
厚度、分切幅宽、卷长、纸芯内径与表面处理值按牌号分别规定。物理性能数据用于选型参考；具有合同效力的数值以订单确认与随附技术协议为准，公差范围同时约定。
公差范围与标称值同时约定，是因为决定一卷薄膜能否在某台设备上顺畅运行的，是公差带而不是标称值。标称值用于选型，公差决定产线是否接收。
规格检索词API-210-1600型BOPP胶带母卷分切复卷机 规格API-210-1600型BOPP胶带母卷分切复卷机 技术资料API-210-1600型BOPP胶带母卷分切复卷机 厚度API-210-1600型BOPP胶带母卷分切复卷机 幅宽
用于把 BOPP 大卷加工成 3 寸纸芯封箱胶带，供包装线与胶带加工厂使用。
以上为行业典型用途；牌号与尺寸以您的产线确认。
本牌号的典型应用包括paper and carton lamination、book and magazine binding、food-pack flexible lamination、label and wrapping lamination、gifting and craft paper lamination。具体包材应选用哪个牌号，取决于加工路线、封合方式、保质期目标，以及是否涉及直接接触食品的法规要求。
应用领域paper and carton laminationbook and magazine bindingfood-pack flexible laminationlabel and wrapping laminationgifting and craft paper laminationmetallised and barrier structures
不同加工路线对薄膜的要求并不相同。印刷看重表面能与表面平整度；复合看重粘合强度与走卷稳定性；热封看重明确的热封温度区间；内容物为热填充的包装还要求阻隔性能。同一标称薄膜在不同路线上的表现可能相差很大，因此选型时应说明最终用途。
当多个牌号都看似适用时，决定因素通常是产线所需的加工性能、内容物特性与适用法规。在确定规格前可提供样品试机。
上料：大卷装在 3 寸气动轴上，设定刹车张力。
分切：按成品宽度排刀，最窄条宽 12 mm。
复卷：四轴同时收卷，穿管与切管由配套设备完成。
现场条件：380 V／50 Hz 电源与 5 kg/cm² 气源。
API-210-1600 BOPP TAPE JUMBO ROLL SLITTING REWINDING MACHINE
FOR making 3inch inner diameter carton packing tape
=================================
SPECIFICATIONS & DEVICES LISTING
Technical parameters：
材料最大宽度Material working width：≤1580mm
材料最大直径unwinding diameter： ≤600mm
最小分切宽度mini slitting width： ≥12mm
塑管内径 core inner diameter： ￠3”
机械速度machine speed: ≤180mm/min
使用电源power ： 380V／50Hz
使用空压源air compressor: 5Kg/cm2
Machine front 配置说明：
Final tapes Devices 配置内容
MACHINE STRUCTURE DETAILS配置内容 数量 QTY备注NOTES
放卷机构 unwinding station 1inch steel board, strong machine body ,heavy machine1set
原料轴Unwinding shaft 3寸机械轴 3inch steel shaft with cones at each side 1set
放卷张力 Unwinding tension 气动盘刹 Pneumatic break 1set
张力调节Tension control 手动张力调节 manual1set
放料压轮Pressure roller 摆臂式压轮机构Swing type air cylinders With air filteration oil
压力源 Air meter 1set主电机 Motor
主机调速 Speed adjustAC马达4HP(3KW) main motor 4kw 1set
变频调速Inverter 1set
换卷机构Shafts rotation
换卷电机 Rotation motor
换卷减速机Rrotation Speed reducerAC
马达传动减速机 Ac motor 0.37KW with speed reducer 1set
收卷机构 rewinding Station Slitting razor 1000pcsAlong with order
卷取轴Rewinding shafts 3inch 4pcs
废料收卷机构 Unused materials rewinding 1set
Swing rewinding Movable 移动收废边
操作面板Operation interface
按键式操作面板Button control panel1套set
配套设备 Auxiliary machines
穿纸管机 core loader 1set
配套设备 Auxiliary machines
Auto core cutter 1set .
cutting blades 10PCS，
the cutting shaft cover ,1pc one machine,5pcs extra。
total 6pcs along with order .
配套设备 Auxiliary machinesDoctor rewinder 1台set
模具Mould Size ordered 2套sets ( SIZE ORDERED)
客户自备 Customer supply
空压机 Air compressor 7.5kw suggested 1套set
本牌号通常经heat lamination、metallisation、bag making、slitting and rewinding、corona treatment等工序加工。处理面、热封温度窗口、张力与产线速度应在试机时按实际设备匹配确认，建议批量投产前先试一卷。
加工工序heat laminationmetallisationbag makingslitting and rewindingcorona treatmenthigh-speed lamination lines
试机卷是确定规格最经济的办法。数据表无法回答的问题，它都能回答：薄膜在该产线速度下的走卷表现、处理面方向是否与设备匹配、以及材料在特定设备上封口是否牢靠、上墨是否干净。一小卷试机即可在整单承诺之前厘清这三件事。
试机之前，建议先就处理面、电晕值、纸芯规格与放卷方向与设备逐项确认。这四项最常被想当然地略过，而其中任何一项都可能让产线停机，却与薄膜本身的质量无关。
每一卷均由本标签标识。标签字段由本页产品数据自动生成；批号、日期与操作员字段留空，供包装现场填写。
整
机
出
口
包
装
；
木
箱
排
布
、
吊
点
与
调
试
支
持
按
订
单
约
定
。
卷材按指定纸芯收卷，经包裹、贴附下方所示卷标后装入纸箱并码放托盘运输。每卷均有独立卷号与批次标识，纸箱与托盘外标依装箱单制作，便于到货核对。
储存应保持干燥、避光，远离热源与阳光直射。库存建议按先进先出使用，优先消化较早批次。标签上的搬运标识遵循出口包装标准，同时适用于整卷与外箱。
下方所示的卷标并非装饰，而是把实物卷材与其规格对应起来的凭据，也是投诉可追溯的基础。在开卷前保留原聚乙烯包装，可以防止边缘受损并隔绝灰尘；在薄膜偏薄的牌号上，灰尘会在后续涂布中形成针孔。已经拆包再复卷的卷材应予说明，因为二次包装无法还原原有防护。
到货时对照装箱单做一次快速核对是值得的：卷数、卷号、纸芯与幅宽是否与订单一致，外包装是否完好。来料检验环节花几分钟，远比产线已经开机后才发现缺卷要划算。
包装检索词API-210-1600型BOPP胶带母卷分切复卷机 包装API-210-1600型BOPP胶带母卷分切复卷机 卷标API-210-1600型BOPP胶带母卷分切复卷机 出口包装
封箱胶带仍在此类分切复卷机上加工，需求随电商与物流的胶带消耗变化。
设备规格、交期与付款条件以书面询价与订单确认书为准。
可供厚度、幅宽、卷长、包装方式与交期按每笔询盘书面确认。起订量、交货周期、随货文件与付款条件在下单前双方约定，确保双方依据同一份书面记录执行。
商务条件以书面确认为实，是因为薄膜订单通常按已确认的规格投产，而一旦开机之后再变更厚度、幅宽或卷长，是无法吸收的。下单前的书面确认，才是让交期与规格保持一致的保障。
交期应理解为生产窗口而非固定日期，因为它取决于规格确认时间、产线排期与订单数量。若确有固定日期要求（促销节点、船期或试机日期），请在询盘中注明，便于据此安排。
商务检索词API-210-1600型BOPP胶带母卷分切复卷机 起订量API-210-1600型BOPP胶带母卷分切复卷机 交期API-210-1600型BOPP胶带母卷分切复卷机 供应商
宽度与速度？
有效宽度 ≤1580 mm，放卷直径 ≤600 mm，机械速度 ≤180 m/min。
需要什么公用工程？
380 V／50 Hz 电源与 5 kg/cm² 压缩空气；主电机 4 kW。
MOQ 与交期？
一台起；交期以订单确认书为准，取决于配置。
宽度与速度？
有效宽度 ≤1580 mm，放卷直径 ≤600 mm，机械速度 ≤180 m/min。
需要什么公用工程？
380 V／50 Hz 电源与 5 kg/cm² 压缩空气；主电机 4 kW。
MOQ 与交期？
一台起；交期以订单确认书为准，取决于配置。
以下是下单前最常确认的问题。每一项答复都指向本页其它位置给出的数据与文件，便于采购方在书面沟通前先与规格逐条对照。
本页列出同一加工线常用的相关牌号，便于采购方在选型前对比构造与规格。检测报告、合规证书与物质安全资料表按批次随货签发；若来料检验流程需要，可在发货前先行索取。
对比同一产线上的相关牌号还有第二个用处：它能缩短沟通路径。当备选牌号及其差异已有记录时，询盘可以从一份候选清单开始，而不是从一张空白规格表开始，回复也因此更快、更准确。
文件按批次随货签发。若贵方来料检验流程要求货物到货前先收到文件，请在询盘中说明，可提前提供。
相关检索BOPP薄膜paper and carton laminationbook and magazine bindingfood-pack flexible laminationlabel and wrapping lamination
请提供胶带宽度、大卷尺寸、纸管类型、产量要求、现场电源与气源；据此给出机器配置。
询价时请提供：牌号与产品编码、所需厚度、幅宽、卷长与纸芯规格、处理面、拟用机型与用途、数量、包装要求、目的地及期望交期。提供这些信息可直接进入书面确认环节，减少往返澄清。
信息完整的首次询盘，是拿到书面确认最快的路径。最常被反复追问的三项是处理面、纸芯规格与卷长，原因是它们常被想当然地略过而未写明 —— 而这三项都会直接改变可供方案。
询价检索词API-210-1600型BOPP胶带母卷分切复卷机 询价API-210-1600型BOPP胶带母卷分切复卷机 报价API-210-1600型BOPP胶带母卷分切复卷机 价格
邮箱: sales@boppfilmsales.com, admin@apigcl.com · Whatsapp/Wechat/Mobile: +86-18919654871
我需要给卖家发送邮件
